Robomow RT300 User Manual

38 39
GO!
Your mower is ready!
• Place your mower in the center of your lawn
• Press Mow for 2 seconds to switch it on
• Now press the STOP /
once to send the mower to the Base Station.
• The mower will start driving towards the edge of the lawn to locate
the Perimeter Wire. Once on it, the mower will follow the wire to
reach the Base Station and park there for charging.
Operating your mower is super easy! For basic commands and
troubleshooting, please refer to the “Quick Reference” part .
2 sec

Robomow RT300 Specifications

General

Max Lawn Size	300 m²
Battery Type	Lithium-Ion
Battery Capacity	2.0 Ah
Power	100 W
Rain Sensor	Yes
Smartphone App	Yes
Boundary Wire	Yes
Mowing Time on One Charge	60 minutes