4 5
Always connect the power supply to the indoor, weather-protected
power supply circuit protected by a residual current device (RCD)
with a tripping current of not more than 30 mA. Follow local electric
installation instructions.
Allow the blades to completely stop rotating before lifting or tilting
the mower or approaching the blades.
The AC power supply cord must not be replaced! If the cord is
damaged, the entire power supply should be replaced. Do not
connect a damaged power cord to the supply and do not touch
such cord as it can cause electric shock.
Keep all power cords away from underneath the mower to prevent
damage.
It is your responsibility to:
• Restrict the use of this mower to persons who have read,
understood and follow the warnings and instructions in this
guide and in the mower
• Inform your neighbors you have a robot mower in operation and
that they may be injured if they enter your lawn during operation
Important Safety Information
In case of a lightning storm, disconnect the perimeter wire from
the Base Station and unplug its power supply from the AC socket.
CAUTION
DANGER
DANGER
WARNING
WARNING
To Next Page
Loading...
Need help?
General
