Need help?Do you have a question about the Robopac AETNAGROUP ROBOT S5 and is the answer not in the manual?
General| Model | ROBOT S5 |
|---|---|
| Manufacturer | Robopac AETNAGROUP |
| Category | Industrial Equipment |
| Wrapped Product Dimensions (min) | 600 x 600 mm |
| Wrapped Product Dimensions (max) | Unlimited |
| Maximum Load Weight | Unlimited |
| Film Type | Stretch Film |
| Film Width | 500 mm |
| Max Pallet Weight | Unlimited |
| Max Pallet Height | 2200 mm |
| Power Supply | 230 V, 50/60 Hz |
| Film Carriage Type | FRD |
Identifies and explains the safety devices present on the machine.
Lists crucial technical specifications of the machine, including dimensions and power.
Covers general safety principles, hazard awareness, and symbol interpretation.
Provides guidelines for safe lifting, handling, and installation of the machine.
Outlines safe practices for operating and using the machine.
Specifies norms for safe adjustments and maintenance procedures.
Highlights potential, less obvious risks associated with machine interaction.
Explains the meaning and location of various safety signals and information signs.
Guides the installation of parts that may be detached for transport.
Offers recommendations for safe and effective machine use and functioning.
Provides an overview of the machine's main control units.
Guides on the correct procedure for turning the machine on and off.
Details how to set and save cycle parameters using the control panel.
Explains how to start and stop both single/double and top sheet cycles.
Describes how to perform an emergency stop and restart the machine.
Details the routine and full battery recharge procedures.
General instructions and safety precautions before performing maintenance.
Lists alarm messages, their problems, causes, and solutions for breakdowns.
To Next Page