12
Getting Started
Robot Dustbin Replacement
1. Only replace with the Auto-Empty Dustbin
1. Remove the original robot dustbin.
2. Remove the plate covering the air inlet in the robot.
3. Put in the auto-empty dustbin
Note:
Make sure the dustbin provided with the robot has been replaced with
the auto-empty dustbin or it may fail to empty automatically.
3. Manual Emptying
Manual emptying can be performed by pressing the DOCK
button when the robot is being charged on the dock.
4. Stop Emptying
Press any button on the robot to stop emptying.
Avoid frequent manual emptying.Note:
2. Auto Emptying
Auto emptying will begin when the robot returns to the auto-
empty dock after cleaning.
To Next Page
Loading...
Need help?
General
