10
Getting Started
Assembly
1. Take the screwdriver from its storage bin at the bottom of the base.
4. Place the dock on a hard and at oor (wood/tile/concrete etc.).
Keep at least 0.5 m (1.6 ft) of clearance on either side, 1.5 m (4.9
ft) in front, and 1 m (3.3 ft) above. Check the location has good
WiFi then plug it in.
3. Connect the power cable to the dock, and keep the excess cable
inside the storage slot.
≥
0.5 m (1.6 ft)
≥
0.5 m (1.6 ft)
≥
1.5 m (4.9 ft)
≥
1 m (3.3 ft)
Hold the dustbin cover securely when upside down to prevent damage
from falling.
Note:
2. Place dock upside down on a soft, at surface (carpet/towel/
cloth) and attach the base by using the six screws provided.
To Next Page
Loading...
