06
Safety Information
•
Do not charge non-rechargeable batteries.
•
In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is regularly switched on and o by the utility.
•
Be sure that the supply voltage meets the requirements listed on the dock.
•
Only use the power cable provided with the product to prevent potential smoke, heat or re.
•
Do not use the product with any type of power adapter, as this may cause danger and void the warranty.
•
Do not dismantle, repair or modify the battery or charging dock.
•
Do not wipe the charging contacts with wet cloth or wet hands.
•
If the power cord is damaged, stop using it immediately. It must be replaced by the manufacturer, its service agent, or similarly qualied
persons to avoid a hazard.
•
If the dock is placed in an area susceptible to thunderstorms or with unstable voltage, take protection measures.
•
Use of the original packaging for transportation is advised.
•
Unplug the power cable before placing the dock into storage.
Battery and Charging
WARNING
To Next Page
Loading...
Need help?
General
