Roborock S6 User Manual

Safety Information
Baery and Charging
WARNING
Do not charge non-rechargeable baeries.
For the purposes of recharging the baery, only use the detachable supply Unit
Roborock CDZ08RR or CDZ09RR provided with this product.
Do not dismantle, repair or modify the baery or charging dock.
Keep the charging dock away from heat (such as heating vents).
The baery must be removed before disposing the product.
The product must be disconnected from the supply mains when removing the
baery.
The baery must be disposed of safely. Do not discard waste baeries. Leave them
with a professional recycling organization.
Do not wipe or clean the charger prongs with wet cloth or wet hands.
If the power cord is damaged, stop using it immediately. It must be replaced by the
manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
4

Roborock S6 Specifications

General

Shape	Round
Product color	White
Remotely operated	Yes
Dust container type	Bagless
Noise level	58 dB
Integrated sensors	Accelerometer, Infrared sensor
Number of programs	14
Dust capacity (total)	0.48 L
HEPA filtration system	-
Floor surfaces supported	Carpet, Hard floor
Threshold climbing (max)	20 mm
Battery life	250 m²
Battery capacity	5200 mAh
Power consumption (typical)	58 W

Weight and Dimensions

Depth	350 mm
Width	353 mm
Height	96.5 mm