Roborock S7 Max Ultra Series - Battery and Charging Safety; International Symbols Explanation

04
Safety Information
Battery and Charging
•
Keep the charging dock away from heat (such as radiators).
•
Do not wipe the charging contacts with wet cloth or wet hands.
•
Turn the robot o and use original packaging for shipment.
•
If placing the robot into storage, charge it fully and turn it o before placing it in a cool dry place. Recharge it at least
every three months to prevent the battery over discharging.
•
Do not use the product when the temperature is higher than 40°C (104°F) or lower than 4°C (39°F), or there is any liquid
or sticky substance on the oor.
Grounding methods
GROUNDED OUTLET
GROUNDING PIN
GROUNDED OUTLET BOX
ADAPTER
METAL SCREW
TAB FOR GROUNDING
SCREW
AA200
(A)
(B)
(C)
This appliance is for use on a nominal 120-V circuit and has a grounding attachment plug that looks like the plug illustrated
in sketch A in Grounding methods. Make sure that the appliance is connected to an outlet having the same conguration as
the plug.
No adaptor should be used with this appliance.
International Symbols Explanation
~ – ALTERNATING CURRENT symbol [symbol IEC 60417-5032 (2009-02)]
– DIRECT CURRENT symbol [symbol IEC 60417-5031 (2009-02)]
– PROTECTIVE EARTH (Protective Ground) symbol [symbol IEC 60417-5019 (2009-02)]