Need help?Do you have a question about the Roborock S7 Max Ultra Series and is the answer not in the manual?
General| Model | Roborock S7 Max Ultra Series |
|---|---|
| Category | Vacuum Cleaner |
| Suction Power | 5500 Pa |
| Battery Capacity | 5200 mAh |
| Dustbin Capacity | 400 ml |
| Noise Level | 67 dB |
| Navigation | LiDAR Navigation |
| Mopping Function | Yes |
| Obstacle Avoidance | ReactiveAI 2.0 |
| Auto-Empty Dock | Yes |
| Auto Mop Washing | Yes |
| Auto Water Refilling | Yes |
| Auto Dustbin Emptying | Yes |
| Auto Drying | Yes |
| App Control | Yes |
| Voice Control | Yes |
| Compatible Voice Assistants | Amazon Alexa, Google Assistant, Siri |
| Multi-floor Mapping | Yes |
| Virtual Barriers | Yes |
| Carpet Detection | Yes |
| Charging Time | 4 hours |
| Operating Time | Up to 180 minutes |
| Mopping System | VibraRise |
| Weight | 4.7 kg |
| Wi-Fi Connectivity | 2.4GHz Wi-Fi |
| Water Tank Capacity | 200 ml |
| Dimensions | 353 x 350 x 96.5 mm |
Detailed explanation of grounding requirements for electrical safety.
Information on charging the robot and battery care guidelines.
Explanation of symbols used in the manual and on the device.
Details on regulatory compliance and product specifications.
Contact information for the authorized representative in the USA.
Overview of robot's top components and controls.
Overview of robot's bottom components and sensors.
Components visible when the robot's upper cover is opened.
Details about the VibraRise mop mount and pads.
Identification of various parts of the charging dock.
Explanation of the dock's status indicator lights.
Information on storing the power cable.
Critical safety and placement advice before installation.
Instructions on where and how to position the charging dock.
Guidance on optimal placement of the dock for performance.
Steps to power on the robot and initiate charging.
Instructions on downloading and installing the companion app.
Procedure to reset the robot's WiFi connection.
Steps to add the robot to the app.
How to turn the robot on, off, and put it into standby mode.
Guide on filling the robot's water tank for mopping.
How to initiate a cleaning cycle.
How to activate and use the spot cleaning function.
Instructions for pausing and resuming robot operation.
Information on the robot's sleep mode and how to wake it.
Explanation of the Do Not Disturb (DND) mode settings.
How to enable/disable the child lock feature.
Details on how the robot charges after cleaning or pausing.
How to identify and handle error states and alerts.
Procedure for resetting the robot's system.
Steps to restore the robot to its original factory settings.
How the robot automatically washes its mop.
Instructions for cleaning and replacing the main brush.
Guide for cleaning and replacing the side brush.
How to clean the omnidirectional wheel.
Instructions for cleaning the main wheels.
Steps for cleaning the dustbin and its filter.
Guide on cleaning and replacing the washable filter.
Instructions for cleaning and attaching the VibraRise mop cloth.
How to clean various robot sensors for optimal performance.
Correct procedure for moving the charging dock.
Steps for cleaning the dirty water tank.
How to clean charging contacts on the robot and dock.
Instructions for cleaning and replacing the maintenance brush.
Steps for cleaning the water filter.
How to clean the dock's base and air inlet.
Guide for replacing the disposable dust bag in the dock.
Procedure for cleaning the air duct to prevent blockages.
Instructions for safely removing the battery for disposal.
Technical specifications for the robot.
Technical specifications for the dock.
Troubleshooting steps for power and charging issues.
Solutions for the robot failing to dock or exhibiting abnormal behavior.
How to address unusual noises and poor cleaning results.
Steps to troubleshoot and resolve WiFi connectivity problems.
Troubleshooting tips for scheduled cleaning failures.
Solutions for issues with water dispensing during mopping.
Troubleshooting for the robot not resuming cleaning after charging.
Steps to take when the robot fails to return to the dock or misses spots.
Solutions for slow water tank filling.
Troubleshooting for a steady red light on the dock.
Solutions for poor auto-emptying performance or noise.
Steps to resolve 'Error 42' related to a jammed maintenance brush.
Troubleshooting steps for mop washing and auto-drying functions.
Solutions for when the auto-emptying function fails.
Troubleshooting for the mop not being washed.
To Next Page