Do you have a question about the Roborock S7 MaxV Plus and is the answer not in the manual?
Suction Power | 5100 Pa |
---|---|
Battery Capacity | 5200 mAh |
Dustbin Capacity | 400 ml |
Water Tank Capacity | 200 ml |
Auto-Empty Dock | Yes |
Mopping Function | Yes |
Voice Control | Yes |
Navigation Type | LiDAR |
Mopping System | VibraRise |
Obstacle Avoidance | ReactiveAI 2.0 |
Battery Life | Up to 180 minutes |
Noise Level | 67 dB |
App Control | Yes |
Multi-floor Mapping | Yes |
Virtual Walls | Yes |
Carpet Detection | Yes |
Dimensions | 353 x 350 x 96.5 mm |
Navigation | LiDAR |
Operating Time | 180 minutes |
Weight | 4.7 kg |
Safety precautions and warnings related to the battery and charging process for the robot vacuum.
Explanation of common electrical symbols used in the manual, such as AC and DC current.
Details the components and controls visible on the top surface of the robot.
Details the components on the underside of the robot, including sensors and brushes.
Details components accessible when the robot's upper cover is opened, like WiFi indicator.
Lists and describes the parts of the robot's dustbin and its filter system.
Details the components of the electric water tank for mopping functionality.
Information on the mop bracket and cloth, including attachment and features.
Lists included accessories like power cable, dust bag holder, screwdriver.
Instructions on where and how to place the charging dock for optimal robot operation.
Steps for powering on the robot and ensuring it is charged properly for use.
Instructions for removing, filling, and reinstalling the water tank for mopping.
Steps to install the VibraRise mop cloth and mop bracket for effective mopping.
Guide on downloading and installing the Roborock or Xiaomi Home app for robot control.
Steps to reset WiFi, connect to the network, and add the robot to the app.
Guide to powering the robot on/off and initiating/stopping cleaning tasks.
Details on spot cleaning, auto/manual emptying, and stopping emptying.
Instructions on how to use, replace, and handle the disposable dust bag.
How to pause the robot during cleaning and resume or send it back to the dock.
Steps for refilling the water tank and cleaning the VibraRise mop cloth.
Information on sleep mode, DND mode, and child lock features.
Details on automatic charging, handling errors, and system reset procedures.
Procedure to restore the robot to its original factory settings.
Instructions for cleaning and maintaining the robot's main brush and its components.
Guide on how to clean the robot's side brush regularly.
Steps for cleaning and maintaining the robot's omni-directional wheel.
How to clean the robot's main wheels for optimal performance.
Procedure for cleaning the robot's dustbin.
Instructions for cleaning and drying the washable filter.
How to clean the robot's water tank.
Guide on cleaning and maintaining the VibraRise mop cloth after each use.
How to clean various sensors on the robot for accurate navigation.
Maintaining charging contacts and battery health for optimal performance.
Procedures for emptying the dustbin and cleaning the dustbin and cyclone separator.
Steps for cleaning and replacing the robot's filters.
Instructions on cleaning the robot's air duct.
Guide on how to replace the disposable dust bag.
Cleaning the dock's beacon, charging contacts, and electrode brushes.
Technical specifications for the robot, including model, battery, weight, and charging.
Technical specifications for the auto-empty dock, including voltage, power, and battery.
A table listing error codes and their corresponding solutions for robot malfunctions.
Solutions for issues like the robot not powering on or not charging.
Troubleshooting for slow charging, docking, noise, and WiFi connection problems.
Solutions for poor cleaning ability or dust falling out.
Addressing issues with scheduled cleaning and robot operation modes.
Solutions for the robot not returning to dock or missing spots.
Troubleshooting for dock indicator lights, emptying issues, and charging problems.