EasyManuals Logo

Roborock S7 MaxV Plus User Manual

Roborock S7 MaxV Plus
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
012
App Features
Note: Functions and details of the app may vary slightly due
to the continuous app development and updates.
Cleaning Map
Custom Cleaning Modes
Cleaning Mode Switch
Robot Information
More Features
Multi-map management
Real-time vacuum and mop route
Carpet display
Map zoning
Map editing
Scheduled
Selective Room
Zone
No-Go Zones, No-Mop Zones, and
Invisible Wall
Custom
Carpet Boost
Suction Power Levels
Mop Intensity Levels
Cleaning History
Battery Level
Care & Maintenance
Firmware Update
Video Call
Volume Adjustment
Language Selection
Do Not Disturb Mode
Voice Assistant Support
C1
Main Brush
C2
Side Brush
*
Clean every 2 weeks and replace every 6-12 months.
C1-1—Main Brush Cover
C1-2—Latches
C1-3—
Main Brush
C1-4—Main Brush Caps
C1-5—Main Brush Bearing
C1-6—
Turn over the robot and press the
latches to remove the main brush cover.
Pull out the main brush and remove
the main brush bearing.
Rotate the main brush caps in the
indicated unlock direction to remove
the caps.
After removing the tangled hair or
dirt at both ends of the main brush,
reinstall it, press on the main brush
cover to lock it in place.
Use a tool, such as a small
screwdriver, to pry out the axle and
take out the wheel.
C1-8—
C1-9—
Notes:
Main brush should be wiped down with wet cloth and left
to dry away from direct sunlight.
Do not use corrosive cleaning fluids or disinfectants to
clean the main brush.
1. Unscrew the side brush screw.
2. Remove and clean the side brush.
Reinstall the brush and tighten the screw.
*
Clean monthly and replace every 3-6 months.
C3
Omni-Directional Wheel
The omni-directional wheel bracket cannot be removed.
Note:
C3-1—
*
Clean as required.
C1-7—
Rinse the wheel and the axle with
water to remove any hair and dirt.
Dry and reattach the wheel, pressing
it firmly in place.
C3-2—
Open the top cover of the robot and
take out the dustbin.
Open the dustbin cover and remove
the filter, then empty the dustbin.
Fill the dustbin with clean water and
close the cover. Gently shake the
dustbin, and then pour out the dirty
water.
Leave the dustbin and the washable
filter to dry.
Clean the main wheels with a soft, dry cloth.
C4
Main Wheels
C5
Dustbin
*
Clean monthly.
C5-2—
C5-1—
*
Clean as required.
Note:
To prevent blockage, only use clean water without any
cleaning liquid.
C5-3—
C5-4—
Routine
Maintenance
C
Only available in the Roborock app.Note:

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Roborock S7 MaxV Plus and is the answer not in the manual?

Roborock S7 MaxV Plus Specifications

General IconGeneral
Suction Power5100 Pa
Battery Capacity5200 mAh
Dustbin Capacity400 ml
Water Tank Capacity200 ml
Auto-Empty DockYes
Mopping FunctionYes
Voice ControlYes
Navigation TypeLiDAR
Mopping SystemVibraRise
Obstacle AvoidanceReactiveAI 2.0
Battery LifeUp to 180 minutes
Noise Level67 dB
App ControlYes
Multi-floor MappingYes
Virtual WallsYes
Carpet DetectionYes
Dimensions353 x 350 x 96.5 mm
NavigationLiDAR
Operating Time180 minutes
Weight4.7 kg

Related product manuals