Roborock S8+ User Manual

06
Safety Information
• For the purposes of recharging the battery, only use the detachable supply unit roborock CDZ12RR, CDZ20RR, AED06HRR or AED07HRR
provided with this product.
• If placing the robot into storage, charge it fully and turn it off before placing it in a cool dry place. Recharge it at least every three months to
prevent the battery over discharging.
• In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
• Be sure that the supply voltage meets the requirements listed on the dock.
• Only use the power cable provided with the product to prevent potential smoke, heat or fire.
• Do not use the product with any type of power adapter, as this may cause danger and void the warranty.
• If the dock is placed in an area susceptible to thunderstorms or with unstable voltage, take protection measures.
• Unplug the power cable before placing the dock into storage.
Battery and Charging
WARNING

Roborock S8+ Specifications

General

Shape	Round
Product color	Black
Remotely operated	Yes
Dust container type	Combi
Brush type	Roller brush
Noise level	67 dB
Frequency band	2.4 GHz
Navigation type	Laser Distance Sensor (LDS)
Integrated sensors	Laser
Water tank capacity	0.3 L
Dust capacity (base)	2.5 L
Dust capacity (total)	2.85 L
HEPA filtration system	-
Dust capacity (vacuum cleaner)	0.35 L
Battery capacity	5200 mAh
Power consumption (typical)	69 W
Suction power	6000 Pa
Package type	Box
Package depth	381 mm
Package width	488.95 mm
Package height	369.06 mm
Package weight	13245 g

Weight and Dimensions

Depth	353 mm
Width	350 mm
Height	96.5 mm
Weight	9298.6 g
Base station dimensions (W x D x H)	305 x 440 x 448 mm