EasyManua.ls Logo

Roborock WD1S1A - Basic Parameters; Troubleshooting

Roborock WD1S1A
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
Basic Parameters
Model
Dimensions
Weight
Rated power
Rated voltage
Charging time
Model
Rated input
Rated output
S036-1A256140HU
100–240 V~50/60 Hz, 1.0 A
25.6 V 1.4 A
WD1S1A
1112 x 270 x 191 mm (3.648 x 0.886 x 0.627 ft)
5 kg (11.03 lbs)
260 W
21.6 V /22.2 V
< 4 hours
22.2 V/5130 mAh(TYP) Lithium-ion battery
21.6 V/5000 mAh(TYP) Lithium-ion battery
Troubleshooting
If an error occurs during operation, the vacuum will stop operating
and play a voice alert. Follow the instructions provided by the alert.
Error 1: Low battery. Recharge now.
Error 2: Clean water tank empty. Refill now.
Error 3: Dirty water tank full. Empty now.
Error 4: Remove blockages from the cleaning head.
Error
For after-sales support, contact our support team at:
Email (US/Non-Europe): support@roborock.com
Phone (US only): 1-855-960-4321
Battery
22.2 V/5130 mAh(TYP) Lithium-ion battery
21.6 V/5000 mAh(TYP) Lithium-ion battery
Battery
Body
Power Supply

Related product manuals