5
WARNING: In order to limit accidents such as electric shocks, personal injury or fire, and in order to limit material damage due to misuse of the appliance,
please read these instructions carefully and follow them strictly. Reading the operating instructions will help you get to know your appliance and enable you
to use the equipment correctly. The operation manual should be kept within easy access to all users for reference and should be read completely by all first
time users of the machine.
IMPORTANT WARNING
UNPACKING
• Carefully remove the equipment from the packaging
and take out all the boxes or packets containing
attachments or specific items.
• WARNING-some of the parts are very sharp e. g.
blades … etc.
INSTALLATION
• Install your machine on a stable solid base.
CONNECTION
• Always check that your power supply corresponds
to that indicated on the serial number plate and that
it is properly sized.
HANDLING
• Always wear cut-resistant gloves when handling
the cutting blades.
SPECIFICATIONS
USE
• Do not open the bowl lid until the blade have
come to a complete stop.
• Never tamper with or defeat the purpose of the
locking and safety systems.
• Never put a hand or nonfood object into the
bowl.
• Do not overload the machine.
• The blades are sharp. Wear cut-resistant gloves
when handling the blades.
CLEANING
• Always unplug your appliance before cleaning.
• Always clean the appliance and attachments at
the end of each use.
• For parts made of aluminum alloys, use cleaning
detergents suitable for aluminum. Presently, there
are no aluminum alloys on the surface of the
machine.
• Do not spray or pressure-wash the machine.
• For plastic parts, do not use detergents that are
too alkaline (i.e., containing too much caustic soda
or ammonia…).
MAINTENANCE
• Always unplug the appliance before servicing.
• Check the seals regularly and ensure that the
safety devices are in good working order.
• It is particularly important to maintain and check
the attachments since certain products contain cor-
rosive agents e.g. citric acid.
• NOTICE
: Never operate the appliance if the
power cord or plug has been damaged. If the
machine fails to operate as described in this
manual, or if the machine malfunctions in any way,
remove the machine from use and have it serviced.
Additionally, discard all food processed at the time
of the malfunction.
•Contact your local Authorized Service Agency if
something appears to be wrong.
WARNING
KEEP THESE INSTRUCTIONS
IN A SAFE PLACE
* Recommendation only, local electrical codes must be followed if applicable.
- Power shown on data plate.
R23
Blixer
®
23
R30
Blixer
®
30
R45
Blixer
®
45
R60
Blixer
®
60
A 49 ¼ 49 ¼ 55 ¼ 55 ¼
B 12 ¾ 14 ¼ 15 ¾ 17 ¾
C 23 ¾ 23 ¾ 23 ¾ 23 ¾
D 23 ¼ 23 ¼ 25 ¼ 25 ¼
E64647171¾
F 31 ¼ 31 ½ 34 ¼ 34 ¼
G 27 ¾ 28 ½ 30 32
Model Motor
Speed
(rpm)
Rated current
(Amp)
Minimum branch *
circuit protection required (A)
R23
Blixer
®
23
208-240 V/60Hz/3ph
1800
3600
16.0
18.2
30
R30
Blixer
®
30
208-240 V/60Hz/3ph
1800
3600
18.6
23.1
40
R45
Blixer
®
45
208-240 V/60Hz/3ph
1800
3600
27.0
35.0
60
R60
Blixer
®
60
208-240 V/60Hz/3ph
1800
3600
32.5
45.0
60
ASSEMBLY PROCEDURES
• Follow the various assembly procedures carefully
(see page 6) and make sure that all the attachments
are correctly positioned.
DIMENSIONS (in inches)
To Next Page
