Robot Compact PRO - Page 4

2. Safety measures & warnings
Safety measures
2.1 Safety instructions
Important:
Please read the safety measures and warnings before you start mounting the manifolds. When
mounting, follow the instructions and guidelines as set out in this manual carefully. Never change
the order of the operations to be performed. Please contact Robot Vloerverwarming B.V. if
anything is unclear about the mounting work.
• Mounting/commissioningmustonlybedonebyexpertstaff(qualiedinstallers),
otherwise the guarantee will cease to apply.
• Manifolds of Robot Vloerverwarming B.V. may be used only for their intended
purpose.
Mounting:
• You must comply with the valid standards and legal regulations.
• Immediately check the delivery upon receipt. In the event of damages or incomplete
delivery, we ask you to immediately contact Robot Vloerverwarming B.V.
• The materials must be stored in a dry, ventilated area and not be exposed to
direct sunlight.
• Open the package carefully. Ensure that you do not damage the product.
• Place the components on a soft and clean surface to avoid damaging your
manifold.
• The manifolds may be installed and operated only in an undamaged condition.
• Mark off the mounting area with safety tape to keep unauthorised people away.
• Keep the workplace clean and free from obstacles when mounting and
performing maintenance.
• Ensurethatthereissufcientambientlightingwhenmountingandperforming
maintenance.
• Mountthemanifoldsonaatnon-combustible/heat-resistantsurfacewithsufcient
carrying capacity. Ensure that the surface is clean and dry and that the manifold is
leveled.
!
02 Manifolds Manual