Robot Roomba j7 - Cleaning Multi-Surface Brushes

Roomba
®
j7 Owner’s Guide 5
EN
Cleaning the Full Bin Sensors
Wipe the inner sensors with a clean, dry cloth
Wipe the bin door with a clean, dry cloth.
2
3
Remove and empty the bin.
1
Closed Door
Opened Door
Pinch the brush frame release
tab, lift the tab and remove any
obstructions.
Remove the brushes from the
robot. Remove the brush caps
from the ends of the brushes.
Remove any hair or debris that
has collected beneath the caps.
Reinstall the brush caps.
Cleaning the Multi-Surface Brushes
Remove any hair or debris from
the square and hexagonal pegs
on the opposite side of the
brushes.
Reinstall the brushes in the robot.
Match the shape of the brush pegs
with the shape of the brush icons in
the cleaning head module.
1
2
3
4
Clear any debris from the vacuum path.
4