The feeler sensors are mechanical momentarily ON switches that when
pressed it completes the circuit and can trigger a response. These are
secondary sensors in case our other sensors do not work.
20
Step 4: Assembling the “Feeler” (switches) Sensors
Parts:
- (4) 3/4” flat head screws
- (4) lock nuts
- (2) Feelers momentarily ON
switches (prewired)
- Star screwdriver
- (1) Lower chassis
Feeler
Sensors
Note: If you are building the Sumobot
(Experiment 8) first then skip to Step 5.
The switches are for other experiments
To Next Page
Loading...