Need help?Do you have a question about the RoboToolz RT-7690-2 and is the answer not in the manual?
Accuracy| accuracy level | ±1/8" (.3 mm) @ 100 ft. (30m) |
|---|---|
| accuracy plumb | ±1/4" (.6 mm) @ 100 ft. (30m) |
| plumb alignment | ±2.0 degrees |
Range and Modes| RF remote control/laser detector range | 300 ft. (90m) |
|---|---|
| self-leveling range | ±6 degrees |
| operating modes | Spin and Line Dither/Scan |
Power| base unit power supply | AC adapter or four “D” batteries |
|---|---|
| RF remote control/laser detector power supply | 9V battery |
| laser output | Two 635 nm, 5 mW maximum |
Environmental and Dimensions| operating temperature range | 14°F (-10°C) to 113°F (45°C) |
|---|---|
| storage temperature range | 14°F (-10°C) to 158°F (70°C) |
| dimensions | 8" x 6" x 6" (20.32 cm x 15.24 cm x 15.24 cm) |
Labels attached to the unit identifying laser radiation and safety precautions.
Compliance statement for Class B digital device, outlining interference rules and user guidance.
Lists key features of the RT-7690-2 laser system, including base unit and remote capabilities.
Details the accessories provided with the RT-7690-2 laser system for enhanced usability.
Identifies and labels the various parts of the RT-7690-2 base unit.
Identifies and labels the parts of the RF remote control/laser detector.
Describes the function of each control button on the RT-7690-2 base unit.
Describes the function of each control button on the RF remote control/laser detector.
Step-by-step instructions for powering on the RT-7690-2 laser system.
Explains how to operate the level and plumb lasers independently or simultaneously.
Details the spin mode for dispersed beam visibility and speed selection.
Details the Line Dither/Scan mode for brighter beams and variable line lengths.
Explains indicators and behavior when the unit is out of self-leveling range.
Illustrates and explains the icons on the laser detector's LCD display.
Instructions on activating and using the RF remote/detector for laser detection.
Describes detector settings like resolution, beeper, and power.
Instructions on locating the laser beam using the detector and audio cues.
Explains the use of reflective targets and enhancement glasses.
Demonstrates using the laser for leveling in carpentry, drop ceilings, framing, and concrete.
Demonstrates using the laser for plumb work in carpentry, framing, and concrete.
Demonstrates using the laser for alignment in carpentry, tiling, flooring, and HVAC.
Demonstrates using the laser for grade work in concrete applications.
Details power options for the base unit, including batteries and AC adapter.
Explains low battery indication and automatic standby mode for the base unit.
Details power options for the RF remote control/laser detector.
Explains low battery and standby modes for the RF remote control/laser detector.
Explains automatic laser shutoff and restart based on operating temperature limits.
Provides detailed steps for calibrating the RT-7690-2 laser system for accuracy.
Provides guidelines for maintaining the laser system and ensuring longevity.
Outlines the warranty terms, conditions, and limitations for the product.
Lists detailed technical specifications of the RT-7690-2 laser system.
To Next Page