Robustel GoRugged M1000 Quick Guide

Robustel GoRugged M1000 USB Quick Guide
RT_QG_M1000 USB _v.1.0.0 25.01.2014 3 /7
2.2 Connect the External Antenna (SMA Type)
Connect this to external antennas with SMA male connector. Make sure the antenna is for the correct frequency as
your GSM operator with impedance of 50ohm, and also connector is secured tightly.
2.3 Power On and Connect with PC
User can use the USB cable to connect the modem’s USB Connector to external slave devices / controller / computer.
Note: User needs to install relevant USB driver to PC, which you can find out in the CD.
Chapter 3. Operate the Modem
3.1 Install USB driver
1. In the Control Panel, when you install USB cable to PC, it will popup tab Other devices and show M1000 USB’s

Robustel GoRugged M1000 Specifications

General

Brand	Robustel
Model	GoRugged M1000
Category	Modem
Language	English