Robustel GoRugged M1000 User Manual

Robustel GoRugged M1000
Smart Cellular Modem
For GSM/GPRS/EDGE Networks
User Guide
Document Name: User Guide
Firmware: 1.4.6
ModemConfigurator: 1.4.2
Date: 2013-12-20
Status: /Confidential
DocID: /RT_UG_M1000_v.2.0.0
www.robustel.com

Robustel GoRugged M1000 Specifications

General

Model	GoRugged M1000
Category	Modem
Max Download Speed	150 Mbps
Max Upload Speed	50 Mbps
SIM Slots	1
Ethernet Port	1 x 10/100 Mbps
Antenna Connector	SMA
Power Input	9-36 VDC
Weight	300 g
Connectivity	4G LTE
LTE Bands	B1, B3, B5, B7, B8, B20, B28
Interface	RS232, Ethernet, USB
Power Supply	DC

Summary

About This Document

Copyright Information

Copyright notice for Guangzhou Robustel Technologies Co., Limited.

Trademarks and Permissions

Information on Robustel trademarks and other trade names.

Disclaimer

Legal disclaimer regarding document usage and liability.

Technical Support Contact

Contact details for technical support assistance.

Safety Precautions

General Safety

General safety precautions related to RF interference and equipment usage.

Using Modem in Vehicle

Guidelines for using the modem safely and legally within a vehicle.

Protecting Your Modem

Advice on protecting the modem from damage and ensuring warranty validity.

Product Concept

Overview

An overview of the Robustel GoRugged M1000 modem features and capabilities.

Packing List

Lists the items included in the product package for the modem.

Specifications

Detailed technical specifications of the modem's hardware and interfaces.

Dimensions

Physical dimensions of the modem, including diagrams.

Selection and Ordering Data

Information on how to select and order the correct modem models.

Installation

Overview

An overview of the installation process for the modem.

LED Indicators

Explains the function of each LED indicator on the modem.

Install SIM Card

Step-by-step instructions for inserting and removing the SIM card.

Connect External Antenna

How to connect the external antenna to the modem.

Connect to External Device

Instructions for connecting the modem to external controllers or computers via serial cable.

Connect I/O Device and Sensors

How to connect digital input and output devices and sensors to the modem.

Mount the Modem

Guidance on how to physically mount the modem.

Ground the Modem

Instructions for grounding the modem to mitigate EMI.

Power Supply

Information on connecting the power supply and voltage requirements.

Operate the Modem

Working Mode Overview

Explains the two working modes of the modem: Config Mode and Normal Mode.

Modem Configurator Overview

Introduction to the PC-based software for configuring the modem.

Starting Modem Configurator

Step-by-step guide to launching the Modem Configurator software.

Operation Area Introduction

Overview of the user interface elements within the Modem Configurator.

Export and Import Profiles

How to save and load modem configuration settings for mass deployment.

Com Settings

Settings for serial communication port configuration within the software.

Basic Modem Settings

Basic modem settings like device name, ME type, IMEI, CSD, and SIM PIN setup.

SMS Direct Feature

Feature to convert serial data to SMS and vice versa without AT commands.

Advanced SMS Direct Settings

Advanced settings for the SMS Direct feature, including data packing and delimiters.

Modbus Configuration

Settings for configuring the modem as a Modbus RTU slave device.

Coil Settings

Settings for configuring digital output coils for SMS alerts.

Register Settings

Settings for configuring registers for alarm SMS based on current values.

Digital Input (DI) Configuration

Configuration for Digital Input (DI) settings, including filtering and event counting.

Digital Output (DO) Configuration

Configuration for Digital Output (DO) settings, including alarm actions and pulse modes.

Reboot Settings

Settings for configuring automatic modem reboot schedules via time, call, or SMS.

Phone Book Management

Management of phone numbers for various modem functions like reboot, SMS, and control.

Phone Group Settings

Allows grouping of phone numbers for easier management in other tabs.

Network Status

Allows checking the current network status and registration of the modem.

Init. String Configuration

Configuration of initial AT commands to be sent to the modem on startup.

Debug Mode

Allows changing serial port baud rate and sending AT commands in Normal Mode.

Typical Applications

AT Command Set

Introduction to using AT commands for modem communication.

GSM CSD Connection

How to establish a Circuit-Switched Data connection for modem communication.

Using Short Message Service

How to send, read, and delete SMS messages using AT commands.

GPRS Connection

How to establish a GPRS connection for internet access.

Appendix

Factory Settings

Default COM port settings for Config and Normal modes.

Restore to Factory Default

Procedures to reset the modem to its factory default settings.

SMS Commands for Remote Control

Commands to control and monitor the modem remotely via SMS.

Modbus Address Mapping

Mapping of Modbus addresses for Digital Input/Output and Registers.

GSM Alphabet

Details on the 7-bit default alphabet for SMS and character encoding.

Troubleshooting

Modem LED Not Lighting

Solutions for when the modem's LED indicators are not lit.

Modem Rebooting Continuously

Troubleshooting steps for frequent modem reboots.

No Serial Link Connection

Solutions for establishing a serial connection with the modem.

Receiving "No Carrier" Message

Causes and solutions for the "No Carrier" message during calls.

Terms and Abbreviations