Robustel GoRugged M1000 User Manual

Robustel GoRugged M1000 User Guide
RT_UG_M1000 Standard_v.2.0.0 20.12.2013 50 / 83
Confidential
4. Input AT commands on the HyperTerminal screen (e.g. type “AT” to check the “OK” response from the modem).
4.1.3 AT Commands Examples
Followings are examples of some AT commands. Please refer to the AT command guide for a full description.
Description
AT commands
Modem response
Comments
Receiving signal strength
AT+CSQ
+CSQ: 19,99
The first parameter has
to be at least 15 for
normal communication.
Saves parameters in
non-volatile memory
AT&W
OK
The configuration
settings are stored.

Robustel GoRugged M1000 Specifications

General

Brand	Robustel
Model	GoRugged M1000
Category	Modem
Language	English