Robustel GoRugged M1000 User Manual

Robustel GoRugged M1000 User Guide
RT_UG_M1000 Standard_v.2.0.0 20.12.2013 56 / 83
Confidential
4.3.3 Deleting a Short Message
Type AT+CMGD=x,n and then press Enter.
This is where x represents one of the following options:
“REC UNREAD” Shows received unread messages.
“REC READ” Shows received read messages.
“STO UNSENT” Shows stored unsent messages.
“STO SENT” Shows stored sent messages.
“ALL” Shows all messages.
This is where n represents one of the following options:
0 Delete message at location <include the index number>
1 Delete all READ messages.
2 Delete all READ and SENT messages.
3 Delete all READ, SENT, and UNSENT messages.
4 Delete ALL messages. “REC UNREAD” Shows received unread messages.
Note: Refer to the Documentation and Software CD / AT_Commands / AT_Commands.pdf for further detail
commands information using SMS.
4.4 Using SMS Direct (Only Available under Config Mode)
Robustel’s proprietary SMS Direct Mode has the following features:
1. Transparently converts serial data to short message or vise versa without using AT Commands.
2. Text, binary, and Unicode formats are supported.
3. Verification of Incoming Caller ID is implemented to block uncertified users.
4. The configuration profile can be easily stored, and then copied to other modems.
Please refer to 3.2.5 SMS Direct.

Robustel GoRugged M1000 Specifications

General

Brand	Robustel
Model	GoRugged M1000
Category	Modem
Language	English