Roche CoaguChek XS User Manual

Testing a capillary blood sample
48
Preparing to test
1 Have the test strip container
to hand.
2 Make sure that the code chip
belonging to these test strips
is inserted in the monitor.
3 Prepare the lancing device by
inserting a fresh lancet.
Do not lance your finger until
asked to do so further on in
this description.
ccxs_user_EN.book Seite 48 Montag, 11. Juli 2005 7:11 19

Roche CoaguChek XS Specifications

General

Measurement Principle	Electrochemical
Sample Type	Capillary whole blood
Sample Volume	8 μL
Test Duration	Approximately 1 minute
Test Strip	CoaguChek XS PT Test strips
Result Display	LCD
Power Source	AAA batteries
Measuring Range	0.8 to 8.0 INR
Memory Capacity	Up to 300 results with date and time
Dimensions	138 x 78 x 28 mm