Need help?Do you have a question about the Roche CoaguChek XS Plus and is the answer not in the manual?
General| Sample Material | Capillary whole blood |
|---|---|
| Sample Volume | 8 µL |
| Measuring Range | 0.8 - 8.0 INR |
| Test Time | Approximately 1 minute |
| Display | LCD |
| Device Type | Portable Coagulation Analyzer |
| Intended Use | Self-testing for INR (International Normalized Ratio) in patients on anticoagulation therapy |
| Test Method | Electrochemical detection |
| Test Strip | CoaguChek test strips |
| Memory | Up to 100 test results |
| Power Source | Battery-operated |
| Operating Temperature | 18°C to 32°C (64°F to 90°F) |
| Storage Temperature (Test Strips) | 2 °C to 30 °C |
| Relative Humidity | 10% to 90% (non-condensing) |
Explanation of hazard symbols and signal words for safety.
Step-by-step guide for installing batteries into the meter.
Configuring user and patient identification settings.
Procedure for inserting the test strip code chip.
Step-by-step procedure for performing a blood test and interpreting results.
Steps for preparing control solutions and the meter for QC testing.
Procedure for conducting and interpreting liquid quality control tests.
Interpreting and resolving common error and status messages.
Troubleshooting common issues without error messages.
Details of the manufacturer's warranty for the meter.
Step-by-step guide for observers and operators using the OTS feature.
To Next Page
