Need help?Do you have a question about the Roche CoaguChek XS and is the answer not in the manual?
Outlines the sequence of actions required for initial setup before first use, including battery insertion and date/time setting.
Details the process of inserting the correct code chip for test strip compatibility and verification.
Guides users through configuring date/time formats, values, and measurement units for results.
Details how to configure the beep tone and define target INR range limits for result interpretation.
Step-by-step instructions for performing the test, including monitor checks, strip insertion, and applying blood.
Details specific error scenarios encountered during operation and their corresponding solutions.
Outlines the sequence of actions required for initial setup before first use, including battery insertion and date/time setting.
Details the process of inserting the correct code chip for test strip compatibility and verification.
Guides users through configuring date/time formats, values, and measurement units for results.
Details how to configure the beep tone and define target INR range limits for result interpretation.
Step-by-step instructions for performing the test, including monitor checks, strip insertion, and applying blood.
Details specific error scenarios encountered during operation and their corresponding solutions.
General| Measurement Principle | Electrochemical |
|---|---|
| Sample Type | Capillary whole blood |
| Sample Volume | 8 μL |
| Test Duration | Approximately 1 minute |
| Test Strip | CoaguChek XS PT Test strips |
| Result Display | LCD |
| Power Source | AAA batteries |
| Measuring Range | 0.8 to 8.0 INR |
| Memory Capacity | Up to 300 results with date and time |
| Dimensions | 138 x 78 x 28 mm |
To Next Page
