Meter Setup
37
Result Units
Use this setting to select the unit(s) of measure to be displayed with the results.
4 Touch or to change the contrast
in a range from 0 to 10.
■ Contrast “0” makes the display very dark.
■ Contrast “10” makes the display very light.
5 Touch to save this setting, or
touch to exit this menu without
saving any changes.
The display automatically returns to the
previous screen.
1 From the Main Menu, touch Setup to
open the meter settings.
2 From the Setup Menu, touch Screen.
3 From the Screen menu, touch Result
Units.
Contrast 09:15 am
04/19/2012
Contrast (0-10):
5
Main Menu 09:15 am
04/19/2012
Control Test
Review Results
Setup
Patient Test
Setup Menu 09:15 am
04/19/2012
ID Setup
QC Settings
Options
Screen
Screen 09:15 am
04/19/2012
Language Selection
Result Confirmation
Date / Time
Result Units
Contrast
To Next Page
Loading...
