Extended Functionalities
116
Operator lists
After powering the meter on, an Operator login may be configured. There are two possible con-
figurations for an Operator login:
■ Operator is activated, but there is no list available:
The Operator can log in via the onscreen keypad. The use of the meter is not restricted to
a predefined Operator group, so Operator IDs are entered via the onscreen keypad and
stored with test results for informational purposes only.
Meters which are managed by a DMS may receive an Operator list.
■ Operator is activated, a list is available and displayed on the login screen:
The Operator selects the ID from the displayed list. If so configured by the Administrator,
the Operator may also be required to enter a password to log in.
This first configuration is also available without a DMS.
When working with operator lists: The use of the meter is restricted to the operators on this
list.
To Next Page
Loading...
