Supplement for Observed Test Sequence
139
14 Supplement for Observed Test Sequence
Observed Test Sequence (OTS)
The Observed Test Sequence* (OTS) function allows an observer (supervisor) to assess and
record an operator’s performance (e.g., for recertification purposes). The observer monitors an
operator during a test to check that the test is being performed according to the recommended
procedures. He/she then evaluates the performance and passes or fails the operator. This
assessment is saved together with the test result and any desired comments.
*Note: This feature comes “disabled” on the meter system.
Observed Test Sequence options can only be configured using a DMS. The availability of
electronic configuration options will thus vary according to the data management software
utilized by your institution. Consult your system administrator.
To Next Page
Loading...
