Roche CoaguChek XS Plus - Patient ID

Meter Setup
65
Patient ID
In the default setting, input of Patient IDs is set to No. This means each test is simply assigned a
consecutive number. However, you can require that a Patient ID be entered or make it optional.
If you want to create a list of Patient IDs from which you can select a patient for testing, addi-
tional software (a data management system) and the Handheld Base Unit are required (see
page 115).
1 From the Main Menu, touch Setup to
open the meter settings.
2 From the Setup Menu, touch ID Setup.
3 From the ID Setup menu, touch Patient .
Main Menu 09:15 am
04/19/2012
Control Test
Review Results
Setup
Patient Test
Setup Menu 09:15 am
04/19/2012
ID Setup
QC Settings
Options
Screen
ID Setup 09:15 am
04/19/2012
Patient
Operator
Admin.