Roche CoaguChek XS Plus - Beeper

Meter Setup
49
Beeper
The CoaguChek XS Plus meter can display information visually and alert you to special circum-
stances with a Beeper. When the Beeper is enabled, the meter beeps when:
■ it is switched on
■ it detects a test strip
■ pre-heating of the test strip is complete and you need to apply a sample
■ it detects a sample
■ the test is completed and the results are displayed (a long beep)
■ an error occurs (three short beeps)
■ an external power adapter is connected when the meter is on
You can also activate a Key Click. When a Key Click is enabled, the meter clicks briefly every time
a button is touched, facilitating the input of information.
We recommend that you keep the Beeper enabled at all times.