STANDARD PRECAUTIONS
17
EN
DISTRIBUTOR
Sweden:
Minicars Hobby Distribution AB
Annelundsgatan 17C
749 40 Enköping, Sweden
Tel.: +46-171-14 30 02
The United Kingdom:
CML Distribution Ltd
Saxon House, Saxon Business Park, Hanbury Road
Bromsgrove, Worcestershire
B60 4AD, England
Tel.: +44 (0)1527 575349
Australia:
Model Engines Pty Ltd
Unit 1/32 Bluett Drive
Smeaton Grange
NSW 2567 Australia
Tel.: +61(0)411128284
Type82e/87 Kommandeurwagen uses swing axle independent suspension, namely torsion springs
are adopted instead of torsion bars as the elastic element. If torsion springs are too hard when
holding up car weight, the cars movement will be extremely bouncy and in this case will not act like
the real car. Hence, we selected soft and tight torsion springs to ensure a better driving performance,
but also to lead to the front and rear suspension not rebounding at rest, which is normal.
The real car's maximum ground clearance is 310mm (scaling ratio 25.8mm). To meet the perfor-
mance requirements of RC off-road and considering the extra weight of figures, the maximum ground
clearance set in the model is 30mm for no-load and 25mm for full-load, which can present a more
simulated driving posture under different load conditions.
30mm
25mm
To Next Page
Loading...
