3
Step 3: Select your Connection Type.
The router supports three connection types: PPPoE, Dynamic IP Address and Static IP Address.
And the router will detect your internet connection type automatically. Set required parameters
and click “Next”.
Note: If your internet connection type is Dynamic IP, tap "Next”.
Note: PPPoE is used for illustration here. If you migrated your PPPoE user name and password
from your original router, this router auto-lls the ISP User Name and ISP Password. Otherwise,
you should enter your PPPoE user name and password and tap “Next”.
Note: If your internet connection type is Static IP, enter your IP address and other information
your ISP provides, and tap "Next".