To Next PageTo Next Page
Need help?Do you have a question about the rock space AC1200 and is the answer not in the manual?
General| Wireless Standard | IEEE 802.11ac/n/g/b/a |
|---|---|
| Antennas | 4 x External Antennas |
| Power Supply | DC 12V/1A |
| Frequency Bands | 2.4GHz, 5GHz |
| Maximum Speed | 1200Mbps |
| Security | WPA/WPA2-PSK |
| Operating Temperature | 0°C ~ 40°C |
| Storage Temperature | -40°C ~ 70°C |
| Operating Humidity | 10% ~ 90% non-condensing |
| Storage Humidity | 5% ~ 90% non-condensing |
| Ports | 1 x 10/100Mbps WAN port, 3 x 10/100Mbps LAN ports |
Overview of the router's technology, 2.4GHz and 5GHz band speeds, and high-speed application support.
Lists key features like Wi-Fi standards, data rate, security, filtering, ports, and modes.
Describes the front panel of the router, focusing on its 5 LEDs for connection status indication.
Provides step-by-step instructions for connecting the router, modem, and computer.
Explains how to check the router installation using the LED indicators for normal status.
Guides users through accessing network adapter settings via the Control Panel.
Instructs users to select the TCP/IPv4 protocol for network configuration.
Details how to configure IP and DNS settings automatically for the computer.
Explains how to manually configure IP address, subnet mask, and gateway for the PC.
Instructions to access the router's web interface via a browser using its IP address.
Guides users to select the router's operating mode (Gateway, Bridge, ISP).
Details the process of setting the router's time zone for accurate logging and scheduling.
Instructions for configuring the router's LAN interface settings, including IP and subnet mask.
Explains how to configure WAN connection types like DHCP, Static IP, and PPPoE.
Configuration for basic 5GHz wireless settings, including band, SSID, and channel.
Setup for 5GHz wireless security using WPA/WEP encryption and pre-shared keys.
Advanced configuration options for the 5GHz wireless network (wlan1).
Detailed security setup for the 5GHz wireless network (wlan1), including encryption and keys.
Setting up access control for the 5GHz wireless network (wlan1) using MAC addresses.
Configuration for Wireless Distribution System (WDS) on the 5GHz network (wlan1).
Tool to scan for wireless networks for the 5GHz band (wlan1).
Setup for Wi-Fi Protected Setup (WPS) for the 5GHz wireless network.
Setting up wireless scheduling rules for the 5GHz network.
Steps to connect to a wireless network using Windows 7.
Instructions to select the wireless network name (SSID) from the available list.
Guide to entering the Wi-Fi security key (password) to connect.
Guide to changing the router's administrator password for enhanced security.
Introduction to the setup wizard that guides users through initial router configuration.
Explains how to set different operating modes for NAT and bridging functions.
Configuration of basic wireless settings for the 2.4GHz band (WLAN2).
Advanced configuration options for the 2.4GHz wireless network (wlan2).
Detailed security setup for the 2.4GHz wireless network (wlan2), including encryption and keys.
Setting up access control for the 2.4GHz wireless network (wlan2) using MAC addresses.
Configuration for Wireless Distribution System (WDS) on the 2.4GHz network (wlan2).
Tool to scan for wireless networks for the 2.4GHz band (wlan2).
Setup for Wi-Fi Protected Setup (WPS) for the 2.4GHz wireless network.
Setting up wireless scheduling rules for the 2.4GHz network.
Configuration of the router's LAN interface, including IP, subnet mask, and DHCP.
Configuration of the router's WAN interface, including connection types like static IP and PPPoE.
Configuration for the WAN interface with IPv6 support, including connection types.
Configuration of LAN settings for IPv6 connectivity.
Configuration of router advertisements for IPv6 network operation.
Configuration settings for IPv6 tunnels, specifically the 6to4 tunnel type.
Setup for restricting data packets based on port range for network security.
Configuration of IP filtering rules to restrict specific IP addresses from accessing the network.
Setup for MAC address filtering to control device access to the network.
Configuration to redirect common network services to specific machines behind the NAT firewall.
Restricting LAN users' internet access by blocking URLs containing specific keywords.
Setting up a Demilitarized Zone (DMZ) for providing Internet services without compromising the private network.
Configuration of VLAN settings for network segmentation and management.
Configuration for dynamic routing protocol or editing static route entries.
Quality of Service settings to prioritize network traffic, improving online gaming experience.
Displays the current status and basic settings of the Access Point.
Shows packet counters for transmission and reception for wireless and Ethernet networks.
Configuration for Dynamic DNS services to associate a domain name with a changing IP address.
Setting the system time by synchronizing with a public time server.
Configuration to prevent denial-of-service attacks by setting limits on network traffic.
Configuration settings for the TR-069 CPE and ACS parameters.
Setting up a remote log server and viewing the system log for troubleshooting.
Running target system commands for diagnostics and troubleshooting.
Instructions for upgrading the Access Point firmware to the latest version.
Saving current settings to a file or reloading previously saved settings, including factory reset.
Instructions for rebooting the router to apply changes or resolve issues.
Procedure for logging out of the router's management interface.
