Need help?Do you have a question about the Rockchip RK3568 EVB and is the answer not in the manual?
Introduces basic functions, hardware characteristics, and software debug methods of RK3568 EVB.
Lists the corresponding product version for this document.
Identifies the target audience for this user guide.
Details the RK3568 processor's features, architecture, and capabilities.
Presents a block diagram illustrating the RK3568 processor's internal structure and connectivity.
Details the system diagram, functions, interfaces, and module layout of the EVB.
Lists the components included in the RK3568 EVB package.
Explains how to power on, power off, and put the RK3568 EVB into standby mode.
Covers the process of upgrading the RK3568 EVB firmware, including driver installation.
Details serial port and ADB debugging methods for the EVB.
Provides a visual overview of the RK3568 EVB board.
Illustrates the power distribution and voltage rails across the EVB.
Details I2C channel multiplexing and addresses for EVB peripherals.
Describes the types and dimensions of connectors for extension boards.
Explains the 12V/2A power input and its conversion to system power voltages.
Details the eMMC and DDR4 memory configurations on the EVB.
Describes the Real-Time Clock circuit based on the HYM8563TS chip.
Details the various input keys on the EVB, including RECOVER, RESET, and navigation keys.
Describes the IRM3638 infrared receiver module used on the EVB.
Explains the gyroscope sensor functionality using the MXC6655XA chip.
Details the 5 available UART interfaces for debugging and communication.
Describes the FT232RL-based UART to USB debug interface.
Explains the CAN bus interface using the TCAN1044V driver chip.
Describes the standard 20pin JTAG interface for debugging.
Details the SPDIF digital audio interface supporting SONY and PHILIPS standards.
Describes the SDMMC0 interface for TF card storage expansion.
Details the MIPI CSI_RX connector for video input.
Describes the MIPI DSI/LVDS TX0 and TX1 interfaces for display output.
Explains the HDMI2.0 output interface supporting up to 4K@60Hz.
Details the eDP output interface and configuration for VGA output.
Describes the VGA output interface via RTD2166 chip.
Covers headphone, SPK, MIC, and MIC array interfaces with DIP switch settings.
Details the extension interfaces for CIF, EBC, RGMII, and BT656 signals.
Details the USB3.0 OTG and HOST interfaces, including micro USB2.0 and standard USB.
Describes the dual Gigabit Ethernet connections via RJ45 ports.
Details the PCIe3.0 connector for external PCIe board installation.
Explains the SATA3.0 interface for connecting storage devices.
Describes the WIFI+BT module, features, and antenna connections.
General| NPU | 0.8TOPS |
|---|---|
| Bluetooth | Bluetooth 5.0 |
| Video Output | HDMI 2.0, MIPI DSI |
| Operating System | Android, Linux |
| Processor | Quad-core Cortex-A55 |
| GPU | Mali-G52 |
| Memory | LPDDR4/LPDDR4X |
| Storage | eMMC |
| Ethernet | Gigabit Ethernet |
| Wi-Fi | 802.11 a/b/g/n/ac |
| Audio Output | I2S |
| USB | USB 2.0, USB 3.0 |
| Video Decoding | 4K H.265/H.264/VP9 |
| Video Encoding | H.265/H.264 |
To Next Page