Need help?Do you have a question about the Rockchip RK3566 EVB2 and is the answer not in the manual?
Company's registered trademarks and ownership statement.
Introduces basic functions, hardware characteristics, and debugging methods of RK3566 EVB2.
Lists the corresponding product versions for the document.
Identifies the target readers for this user guide.
Describes the RK3566 as a quad-core ARM Cortex-A55 processor for AIoT devices.
Illustrates the internal structure and connectivity of the RK3566 chip.
Presents a block diagram of the RK3566 EVB2 system architecture.
Lists the main functions and features supported by the RK3566 EVB2.
Details the various functional interfaces available on the RK3566 EVB2.
Shows the physical layout of functional interfaces on the EVB.
Explains the procedures for powering on, off, and putting the EVB into standby mode.
Guide to installing the necessary USB drivers for the EVB.
Instructions on how to upgrade the RK3566 EVB2 firmware.
Steps to flash firmware using Loader mode.
Steps to flash firmware using Maskrom mode.
Instructions for setting up and using a serial port debugging tool.
Shows the interface for serial port debugging using PuTTY.
Demonstrates the process of connecting and debugging via ADB.
Displays a photograph of the RK3566 EVB2 board.
Describes the DC 12V power input and its distribution to the EVB.
Details the eMMC and DDR memory specifications on the EVB.
Details the signal sequence for MIPI DSI/LVDS TX0 output.
General| SoC | Rockchip RK3566 |
|---|---|
| CPU | Quad-core ARM Cortex-A55 |
| Networking | Gigabit Ethernet |
| Operating System | Android, Linux |
| GPU | Mali-G52 2EE |
| RAM Support | LPDDR4/LPDDR4X |
| Storage Support | eMMC, SD card, SATA |
| Video Output | HDMI 2.0 |
| USB Ports | USB 2.0, USB 3.0 |
| Wireless | Bluetooth 5.0 |
To Next Page