11
RF-AHD35
Note: Some motherboards do not support eSATA hot-plug
and play function. If your motherboard does not, follow
these steps to set up your RF-AHD35:
1. Shut down your computer.
2. Turn on your RF-AHD35, then connect it to your computer.
3. Power on your computer.
Notes:
Windows XP/2000/Vista/7
No drivers are necessary when using Windows
XP/2000/Vista/7. If the hard drive does not appear in My
Computer, be sure to partition your hard drive.
Mac OS X 10.3.x or later
No drivers are necessary when using Mac OS X 10.3.x or
higher. If the hard drive does not appear on the desktop, be
sure to partition your hard drive.
Using your USB ports
The enclosure provides two USB ports. You can plug any of
the following low-powered USB devices into these ports:
• Keyboard
•Mouse
•Keypad
• Diskette drive
• Network adapter
•Webcam
• Speakers
•Microphone
• Card reader
•Pen drive
•DVD or CD drive
• Digital camera
• Low-capacity 2.5" external hard drive enclosure.
RF-AHD35_09-0774_MAN_ENG_V3.fm Page 11 Friday, September 25, 2009 6:51 AM
To Next Page
Loading...
Need help?
General
