8
required. When you connect the USB 2.0 Y cable to your
computer, use both A male-type connectors to make
sure the enclosure has sufficient power.
The operating system automatically detects and sets up the
new drive.
If the drive is correctly detected, a new drive letter is assigned
(for Macs, the new drive letter appears on your desktop) and the
Safely Remove Hardware icon appears on the bottom right side
of your taskbar.
Notes for Windows users:
If you do not see an additional drive in your system, you
must partition and format the new hard drive. Use Disk
Management in Windows 2000 or Windows XP.
USB 2.0 A male-type
connector for
additional power
USB 2.0 A male-type
connector for data
and bus power
RF-HD25_08-1730 - ENG.fm Page 8 Friday, October 10, 2008 1:21 PM
To Next Page
Loading...
