Need help?Do you have a question about the Rockford Fosgate R1200-1D and is the answer not in the manual?
General| CEA power output | 400W x 1 @ 4Ω ≤1.0% THD+N |
|---|---|
| Frequency response | 20 Hz |
| Bass boost | 0 - 18 dB |
| Efficiency | 85 % |
| Amplifier class | D |
| Low pass filter | Yes |
| Input sensitivity | 150 mV |
| Low pass filter range | 50 - 500 Hz |
| RMS output power (max) | 1200 W |
| Number of amplifier channels | 1 channels |
| RMS power output per channel (2 Ohm) | 800 W |
| RMS power output per channel (4 Ohm) | 400 W |
| Maximum power output per channel (2 Ohm) | 898 W |
| Maximum power output per channel (4 Ohm) | 499 W |
| Audio RCA inputs | 1 |
| Certification | CE |
| Product color | Black |
Weight and Dimensions| Depth | 281 mm |
|---|---|
| Width | 172 mm |
| Height | 50 mm |
| Weight | 7820 g |
Tools and general advice for installing the amplifier, including vehicle considerations.
Guidance on where to mount the amplifier for optimal performance and warranty, covering engine and trunk.
How to set the amplifier's input gain for optimal performance and low distortion.
How to set the variable low-pass crossover frequency between 50Hz and 250Hz.
Setting the variable 15-40Hz filter to limit low-frequency information to the woofer.
Adjusting the variable Bass Boost control for personal preference at 45Hz.
Description of the remote control feature for adjusting output level from the dash or console.
To Next Page