Rocktrail 58787 - Setting Alarms and Activating Daily Alarm

18 GB/IE
Q
Setting the alarm time and
activating the daily alarm
j Press the MODE button
2
as often as necessary until
ALM appears in the display
5
.
j Using the ST. / STP. button
4
to choose daily alarm
1 or daily alarm 2.
j Hold the MODE button
2
down for 2 seconds. The
symbol hr flashes.
j Press the RESET
1
or ST. / STP.
4
button to set the
value you wish to have. The symbol
will appear in
the display
5
.
j Press the MODE button
2
again to set the minutes.
j Press the RESET
1
or ST. / STP.
4
button to set the
value you want.
j Press the ALTI / BARO button
3
to leave the set-up mode.
j Press the RESET button
1
to activate or deactivate the
daily alarm.
Note: If the daily alarm is switched on the symbol
will appear in the display
5
.
The alarm will sound for 30 seconds every day at the
set time.
j Press button
1
,
2
or
3
to stop the alarm sounding.
j If you press the ST. / STP. button
4
when the alarm is
sounding, you will activate the snooze function (
).