26 GB/IE
Q
Adjusting the altimeter
The absolute elevation reading is measured by means of the
change in air pressure. In order to ensure a measurement
that is as precise as possible, the altimeter has to be adjusted
from time to time. Make sure that you adjust the altimeter in
a place that lies at sea level (0 metres) or at a place whose
height above sea level you can enter as a reliable reference.
Imprecise details could lead to errors in later measurements.
j Press the ALTI / BARO button
3
. ALT will appear in
the display
5
.
j Press the MODE button
2
for 2 seconds. The altimeter
display will flash in the display
5
.
j Press the RESET
1
or ST. / STP.
4
button to set the
value you wish to have.
j If you enter incorrect information, press the MODE
button
2
and enter a new value.
j Press the ALTI / BARO button
3
to stop the adjustments.
Q
Measuring the difference in height
The weather station measures the lowest and highest point
(e.g. on long walks).
To Next Page