Rocktrail 58787 - Using the Barometer for Air Pressure

23 GB/IE
“Regulating the default settings for language, time, date”
to find the code you want.
Note: The display
5
shows the local time in each
case beneath the code.
j Press the ALTI / BARO button
3
to leave the world time
mode.
Q
Using the barometer
Note: When the air pressure measured is more than
1100 h / Pa, “HI” will appear in the display
5
.
Note: When the air pressure measured is less than
300 h / Pa, “LO” will appear in the display
5
.
j Press the ALTI / BARO button
3
as often as necessary
until hPa (hectopascal) or mb (millibar) appear in the
display
5
.
j Press the ST. / STP. button
4
for 2 Seconds to choose
between the units hPa, mb and inHg.
Note: The weather station will automatically update
the air pressure.
The weather station will display the air pressure history of
the last 12 hours in the bar display
7
.