Rocktron BANSHEE User Manual

May be covered by one or more of the following: U.S. Patents #4538297, 4647876, 4696044, 4745309,
4881047, 4893099, 5124657, 5263091, 5268527, 5319713, 5333201, 5402498 and 5493617.
Other patents pending. Foreign patents pending.
USER'S MANUAL
! Note !
Read this manual thoroughly before operating this unit. Failure to
heed any warnings contained herein could potentially result in
damage to your equipment.

Rocktron BANSHEE Specifications

General

Controls	Gain, Tone, Volume, Bypass Footswitch
Signal to Noise Ratio	>90dB
Power Requirements	9VDC
Power Supply	9VDC
Input	1/4" Instrument
Output	1/4" Mono
Input Impedance	1MΩ
Frequency Response	20Hz - 20kHz

Summary

Precautions

General Safety and Handling

Covers basic safety guidelines for operating the unit, including water, heat, and ventilation.

Continued Precautions

Servicing and Warranty Information

Details service requirements, potential damage, and warranty voidance for unauthorized repairs.

Operating Temperature Limits

Specifies the operational temperature range for the unit to ensure proper function.

Critical Safety Warnings

High Sound Pressure and Hearing Hazard

Warns about high sound levels produced by the unit and potential permanent hearing damage.

Introduction

Talkbox Function Explanation

Explains how the talkbox effect is achieved by connecting the tube and using mouth movement.

Product Functions and Controls

External Speaker Jack and Warning

Warns about proper use of the external speaker output to prevent damage.

Main Controls and Connections

Describes preamp gain, tone, output, input jacks, and the bypass footswitch.

Connecting the Talkbox Tube

Physical Tube Attachment

Step-by-step guide for attaching the talkbox tube to the unit's driver opening.

Standard Connection Example

Typical Setup Diagram

Illustrates the typical hookup for the talkbox effect with a microphone and amplifier.

Recommended Connection Method

Optimized Setup for Best Sound

Details a recommended connection method using specific microphones for optimal sound quality.

Practice Amp Configuration

External Speaker Usage Warning

Warns against connecting the external speaker out to an amplifier or PA system.

Block Diagram Overview

Signal Flow Schematic

Provides a schematic overview of the unit's internal signal flow and components.

Technical Specifications

Performance Data and Requirements

Outlines input/output levels, impedance, current consumption, power requirements, and output power.