Need help?Do you have a question about the Rocktron MicroHUSH and is the answer not in the manual?
General| Technology | Analog |
|---|---|
| Controls | Threshold |
| Output Impedance | 1 kOhm |
| Signal to Noise Ratio | >90dB |
| Weight | 0.5 lbs |
| Input Impedance | 1M ohm |
| Power Supply | 9V DC |
| Frequency Response | 20Hz - 20kHz |
Details EU standards and directives the MicroHUSH complies with, ensuring electromagnetic compatibility.
Important warnings regarding service, heat exposure, power supply, and general handling to prevent damage.
Explains the pedal's function as a compact, world-famous noise reduction unit for guitarists.
Highlights the pedal's true bypass design, ensuring the signal path remains clean when the effect is off.
Visual guide identifying key parts of the MicroHUSH pedal through numbered callouts.
Defines the THRESHOLD control and its function in activating noise reduction based on signal level.
Details the INPUT, OUTPUT jacks, the 9VDC power jack, and the ON/OFF LED indicator.
Explains how to use the footswitch to engage or disengage the pedal's noise reduction.
Illustrates how to connect the MicroHUSH in a typical guitar effects chain with other pedals and amplifier.
Explains the VCA-based downward expander technology used for effective noise reduction.
Describes the VIR technology that automatically adjusts the release rate of the expander.
Provides guidance on setting the THRESHOLD for optimal noise floor elimination without affecting tone.
Lists key electrical and physical specifications including input/output, impedance, dimensions, and weight.
Details the 9V DC power requirement and recommends specific Rocktron power supplies for operation.
To Next Page
