Rocktron MicroHUSH - Powering the MicroHUSH

How to power the MicroHUSH:
The MicroHUSH requires a 9V DC power supply for operation (not included). We recommend any of
these:
Rocktron DC OnTap 110V USA Plug - Model: 006-2017
Rocktron DC OnTap 220V Euro Plug - Model: 006-2018
Rocktron DC OnTap 240V UK Plug - Model: 006-2022
Rocktron DC OnTap 100V Japan - Model: 006-2033
Rocktron PowerTap (powers your whole pedalboard)
The MicroHUSH’s jack accepts a 2.1mm Plug - Tip Negative/Barrel Positive
(All Rocktron DC OnTap adapters are “switching” power supplies and can be used world wide with
the right plug adapter)
Save yourself tons of money in batteries by using the Rocktron DC OnTap Universal Power Supply to
power this pedal (sold separately). The Rocktron DC OnTap provides a constant ow of power to the
pedal, unlike a battery that will degrade over time. The Rocktron DC OnTap Universal Power Supply
can also power up to 20 pedals and can be used with both 110V and 220V power sources.
Check, www.rocktron.com for more information on the DC OnTap and where to purchase.