To Next PageTo Next Page
Need help?Do you have a question about the Rocktron VOODU Valve and is the answer not in the manual?
General| Tubes | 2 x 12AX7 |
|---|---|
| Inputs | 1 x 1/4" Instrument Input |
| Type | Guitar preamplifier |
| Power Output | N/A (Preamp) |
| Channels | 2 |
| EQ | 3-band EQ (Bass, Mid, Treble) |
| Controls | Gain, Volume, Treble, Mid, Bass, Presence |
| Effects | Reverb |
| Effects Loop | Yes |
| Power Supply | AC 120V/240V |
| Speaker Configuration | N/A (Preamp) |
| Dimensions | 19" x 3.5" x 8.5" (483mm x 89mm x 216mm) |
Details on safe power supply and environmental limits for proper operation.
Specifies the safe operating temperature range for the unit.
Explanation of each control and display element on the front panel for user interaction.
Description of all input/output jacks, MIDI, and power connections on the rear panel.
How to connect the Voodu Valve™ to a stereo power amp for live performance.
Guide for connecting the unit directly to a mixing console for recording or FOH.
Overview of different preset configuration types available for sound shaping.
Introduction to the various effects and parameters available on the Voodu Valve™.
Global settings, signal routing, levels, and distortion characteristics.
Tone shaping with EQ, compression, and speaker cabinet simulation.
Wah-Wah, Phaser, Flanger, Tremolo, Pitch Shift, Chorus, Delay, Reverb parameters.
How to select, change, store, and title presets for custom sounds.
Selecting configurations, assigning controllers, and MIDI communication.
MIDI dump/load, factory resets, and controller reinitialization procedures.
Setting up and using external footswitch control for live performance.
Troubleshooting common error messages and their solutions.
MIDI protocol details and device specifications.
A list of all presets and their associated speaker simulator settings.
