Need help?Do you have a question about the Rocktron Widowmaker and is the answer not in the manual?
Emphasizes careful handling, avoiding water, spills, and servicing by qualified personnel to prevent shock hazards and voiding the warranty.
Specifies the unit accepts 9VAC adaptor, using a voltage doubler for " "±15V to ensure professional sound quality and minimize noise.
States the unit is designed to operate between 32°F and 104°F (0°C and 40°C), and may not function properly outside this range.
Introduces the WIDOWMAKER Guitar Preamp as a high-gain monster for metal guitarists, highlighting its two-channel analog design and tonal capabilities.
Details the Power ON/OFF switch, Power LED, and the 1/4" input jack for connecting instruments.
Explains the Level, Bass, Mid, and Treble controls for the High Gain channel, used for tone shaping.
Covers the GAIN control for distortion and the CHANNEL switch/LED for channel selection.
Details the Level, Bass, Mid, and Treble controls for the Clean channel, used for shaping the clean tone.
Describes the FOOTSWITCH jack for channel switching, the OUTPUT jack for connecting to an amplifier, and the POWER jack for the AC adapter.
Illustrates a basic setup connecting the WIDOWMAKER preamp's output to a power amp's input, with a footswitch for channel selection.
Shows how to connect the WIDOWMAKER through an effects unit (XPRESSION) and then to a power amp, utilizing stereo outputs.
Depicts connecting the WIDOWMAKER directly to a guitar amplifier's input, along with the footswitch for channel switching.
Provides company details for Rocktron (a Division of GHS Corporation), contact phone, email, website, and social media links.
To Next Page
General
