GAIN control (High Gain Channel):
This control is used to determine the amount of GAIN (distortion)
present in the High Gain channel.
CHANNEL switch/LED:
This switch is used to switch the WIDOWMAKER in and out of the
High Gain channel. When the LED is lit, the High Gain channel is
active.
LEVEL control (Clean Channel):
This control determines the output level of the Clean channel, inde-
pendent of the High Gain channel output level.
BASS control (Clean Channel):
This control is used to determine the amount of low frequency infor-
mation present in the clean channel, and is adjustable +-15dB
MID control (Clean channel):
This control is used to determine the amount of mid frequency infor-
mation present in the clean channel, and is adjustable +-15DB.
TREBLE control (Clean channel):
This control is used to determine the amount of high frequency infor-
mation present in the Clean channel, and is adjustable +-15dB
8
9
10
11
12
13
Front Panel....continued:
To Next Page
Loading...
