EasyManua.ls Logo

Rocktron Widowmaker - Front Panel Controls Part 1; Power and Input Jacks; High Gain Channel EQ & Level

Rocktron Widowmaker
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
POWER ON/OFF SWITCH:
Use this switch to turn ON and OFF the WIDOWMAKER
POWER LED:
When lit, the unit is “on”
INPUT jack:
This standard 1/4” mono jack provides an input to the WIDOW-
MAKER from a guitar or other effect.
LEVEL control (High Gain Channel):
This control determines the output level of the High Gain channel,
independent of the clean channel output level.
BASS control (High Gain Channel):
This control is used to determine the amount of low frequency infor-
mation present in the High Gain channel, and is adjustable to +-15dB
MID control (High Gain Channel):
This control is used to determine the amount of mid frequency cut
in the High Gain channel. Up to 30dB of mid range cut may be ap-
plied.
TREBLE control (High Gain Channel):
This control is used to determine the amount of high frequency infor-
mation present in the High Gain channel, and is adjustable +-15dB
Front Panel
1
2
3
4
5
6
7

Related product manuals