Rockwell Automation Allen-Bradley FactoryTalk Analytics LogixAI User Manual

Rockwell Automation Publication 1756-QS002B-EN-P - April 2020 3
FactoryTalk Analytics LogixAI Quick Start
Access a Web Browser on Your Computer to Configure the Appliance
The appliance works best with Google Chrome.
1. Change the IP address of the computer to be in the same range as the default IP address of the appliance.
For example, set the IP address of the computer to 192.168.100.20 and the subnet mask to 255.255.255.0.
a. From the Windows Control Panel or System Tray, choose Network and Sharing Center > Change adapter settings.
b. Right-click the Local Area Connection that is connected to the appliance and select Properties.
c. Double-click the Internet Protocol Version 4 (TCP/IPv4) connection.
d. Choose Use the following address and enter the IP address and subnet mask.
e. Click OK to save the changes.
IMPORTANT
The default IP address of the appliance is 192.168.100.1.
a
b
c
d

Rockwell Automation Allen-Bradley FactoryTalk Analytics LogixAI Specifications

General

Brand	Rockwell Automation
Model	Allen-Bradley FactoryTalk Analytics LogixAI
Category	Control Unit
Language	English