Rockwell Automation Allen-Bradley 1769-AENTR - User Manual

EtherNet/IP Modules
Catalog Numbers 1756-ENBT, 1756-EN2F, 1756-EN2T, 1756-EN2TP, 1756-EN2TPXT, 1756-EN2TR, 1756-EN2TXT,
1756-EN2TRXT, 1756-EN2TSC, 1756-EN3TR, 1756-EWEB, 1768-ENBT, 1768-EWEB, 1769-AENTR
Installation Instructions

Rockwell Automation Allen-Bradley 1769-AENTR Specifications

General

Series	CompactLogix
Protocol	Ethernet/IP
Number of Ports	2
Port Type	RJ45
Communication	Ethernet
CompactLogix Communication Interface	Yes
Operating Voltage	24V DC
Power Supply	24V DC
Mounting Type	DIN Rail
Product Type	Ethernet Communication Adapter
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 85°C
Weight	0.2 kg
Dimensions	118 x 35 x 100 mm

Summary

Install a 1756 EtherNet;IP Communication Module

Connect the Module

Install a 1768 EtherNet;IP Communication Module

Install the Module

Describes the physical installation of the 1768 EtherNet/IP module, including mounting options.

Wire the Module

Install a 1769 EtherNet;IP Adapter

System Configuration

Details the rules and considerations for planning a 1769 EtherNet/IP system configuration.

Set the Network IP Address

Guides on setting the network IP address for the 1769 EtherNet/IP adapter.

Install the Adapter in a 1769 System

Wire the Adapter

Set the Network IP Address

Set the Network IP Address with the Rotary Switches

Details how to configure the IP address using rotary switches on compatible modules.

Set the Network IP Address with the BOOTP;DHCP Server

Explains how to assign IP addresses using a BOOTP/DHCP server.

Set the Network IP Address with RSLinx Software or the Studio 5000 Environment

Covers setting IP addresses using RSLinx or Studio 5000 software.

Reset the Module IP Address to a Factory Default Value

Configure a Workstation to Operate on an EtherNet;IP Network

Configure the Ethernet Communication Driver

USB Communication

Configure a Module Via the USB Port